FMD200-1 Sample concentrator
FMD200-1 Sample concentrator
FMD200-1A Sample concentrator
FMD200-1A Sample concentrator
FMD200-2 Sample concentrator
FMD200-2 Sample concentrator
DISSOLVED AND SUSPENDED SAMPLE CONCENTRATORS

In many science disciplines sample isolation and purification require procedures to concentrate true solutions or particular matter within a solution. Techniques employed include distillation, heating an evaporation dish, freeze drying, filtration or centrifugation of suspended particular matter.

The following group of instruments uses evaporation at RT or moderate heat. The process is accelerated by a stream of dry gas over the surface. The most commonly used gas is industrial dry nitrogen.


These instruments comprise of a base and stand assembly, sample holder and gas distribution system. Test tubes are held in a block. The gas at 5-10 psig passes through a distribution manifold and then through pipettes which blow onto the samples surfaces. Depending on the test-tube size and solvent volume pipettes can be individually raised or lowered to a suitable sample distance


Cat. No.FMD200-1FMD200-1AFMD200-2
Temperature control rangeambient+5°C - 150°C
Timer1min - 99h59min
DisplayLED
Temperature control accuracy @40 - 100°C±0.5°C
Temperature control accuracy @100 - 150°C±1°C
Display Accuracy0.1°C
Heating time (40 - 150°C)≤30min
Standard blocks112
Nitrogen consumption (L/min)0-10
Dimensions (mm)280 x 240 x 110
Needle length (mm)15080150
 230VAC 50/60Hz 200W230VAC 50/60Hz 400W

Sample holding heating blocks

Cat. No.DiameterCapacityDimension (mm)
FMD200-B016 mm4996 x 96 x 49
FMD200-B027 mm4996 x 96 x 49
FMD200-B0310 mm2596 x 96 x 49
FMD200-B0412 mm2596 x 96 x 49
FMD200-B0513 mm2596 x 96 x 49
FMD200-B0615 mm1296 x 96 x 49
FMD200-B0715 mm1696 x 96 x 49
FMD200-B0816 mm1296 x 96 x 49
FMD200-B0916 mm1696 x 96 x 49
FMD200-B1019 mm1296 x 96 x 49
FMD200-B1119 mm1696 x 96 x 49
FMD200-B1220 mm996 x 96 x 49
FMD200-B1326 mm996 x 96 x 49
FMD200-B1428 mm496 x 96 x 49
FMD200-B1540 mm496 x 96 x 49
FMD200-B160.5 ml centrifuge tube4996 x 96 x 49
FMD200-B171.5 ml centrifuge tube2596 x 96 x 49
FMD200-B182.0 ml centrifuge tube2596 x 96 x 49
FMD200-B190.2ml tubes9678 x 114 x 26
FMD200-B200.2ml microplate9681 x 123 x 19

Please note, MD200-1A can only hold B19 or B20

Flow control valve
Flow control valve
Blocks
Blocks
FMD200-1
Sample concentrator, blocks 1, needle length 150mm, 200w
QUOTE
FMD200-1A
Sample concentrator, blocks 1, needle length 80mm, 200w
QUOTE
FMD200-2
Sample concentrator, blocks 2, needle length 150mm, 400w
QUOTE
FMD200-B01
Block, 49 x ø6mm, for FMH200 series
QUOTE
FMD200-B02
Block, 49 x ø7mm, for FMH200 series
QUOTE
FMD200-B03
Block, 25 x ø10mm, for FMH200 series
QUOTE
FMD200-B04
Block, 25 x ø12mm, for FMH200 series
QUOTE
FMD200-B05
Block, 25 x ø13mm, for FMH200 series
QUOTE
FMD200-B06
Block, 12 x ø15mm, for FMH200 series
QUOTE
FMD200-B07
Block, 16 x ø15mm, for FMH200 series
QUOTE
FMD200-B08
Block, 12 x ø16mm, for FMH200 series
QUOTE
FMD200-B09
Block, 16 x ø16mm, for FMH200 series
QUOTE
FMD200-B10
Block, 12 x ø19mm, for FMH200 series
QUOTE
FMD200-B11
Block, 16 x ø19mm, for FMH200 series
QUOTE
FMD200-B12
Block, 9 x ø20mm, for FMH200 series
QUOTE
FMD200-B13
Block, 9 x ø26mm, for FMH200 series
QUOTE
FMD200-B14
Block, 4 x ø28mm, for FMH200 series
QUOTE
FMD200-B15
Block, 4 x ø40mm, for FMH200 series
QUOTE
FMD200-B16
Block, 49 x ø0.5ml tubes, for FMH200 series
QUOTE
FMD200-B17
Block, 25 x ø1.5ml tubes, for FMH200 series
QUOTE
FMD200-B18
Block, 25 x ø2.0ml tubes, for FMH200 series
QUOTE
FMD200-B19
Block, 96 x ø0.2ml, for FMH200-1A
QUOTE
FMD200-B20
Block, microplate, for FMH200-1A
QUOTE
FMD200-FCV
Flow control valve, for FMD200 series
QUOTE
FMD200-N080
Needles, 80mm, for FMD200 series
QUOTE
FMD200-N150
Needles, 150mm, for FMD200 series
QUOTE
Order Type / Payment Method / Address / Shopping Cart / Checkout