Chemically inert polyester labels
Chemically inert polyester labels
Tough-Tags® Precut, peel-off labels
TOUGH-TAGS®

Tough-Tags® are chemically inert polyester labels which adhere strongly to all plastics and other materials. They are temperature resistant from 121°C to -40°C. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconised surfaces be avoided.
Tough-Tags® are precut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags® wrapped around them will slide easily in and out of rotors. Labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.

Teeny Tough Tags®, for 0.2mL PCR tubes, 21 x 6mm, roll/1500

I101
Teeny Tough-Tags®, 21 x 6mm, white
AUD68.00
1500
ADD TO CART 
Tough-Tags® for microscope slides
Tough-Tags® for microscope slides
LASER TOUGH-TAGS® FOR MICROSCOPE SLIDES

Temperature-resistant - From -40°C to 121°C. Tough-Tags® resist boiling water baths, autoclaving and moderate freezer temperatures.


Tough - Chemically inert, polyester sheets resist most organic solvents and caustic agents. They adhere to most plastics, glass and metals without cracking, peeling or degrading.

Compatible - Tubes labelled with Tough-Tags® easily slide in and out of centrifuge rotors without binding.

Specially designed - Label sheets are specially top-coated to readily accept laser printing. Heat-resistant, stay-flat sheets will not jam in laser printers.

The 22 x 22mm labels are ideal for microscope slides and general purpose.
96 Labels/sheet.

Sheet size is 216 x 279mm (US Letter size when printing

I0922-B
Laser Tough-Tags®, 22 x 22mm, blue
AUD134.00
pk/2400
ADD TO CART 
I0922-G
Laser Tough-Tags®, 22 x 22mm, green
AUD134.00
pk/2400
ADD TO CART 
I0922-O
Laser Tough-Tags®, 22 x 22mm, orange
AUD134.00
pk/2400
ADD TO CART 
I0922-R
Laser Tough-Tags®, 22 x 22mm, red
AUD134.00
pk/2400
ADD TO CART 
I0922-W
Laser Tough-Tags®, 22 x 22mm, white
AUD134.00
pk/2400
BACKORDER 
I0922-Y
Laser Tough-Tags®, 22 x 22mm, yellow
AUD134.00
pk/2400
BACKORDER 
I0922-Z
Laser Tough-Tags®, 22 x 22mm, rainbow
AUD134.00
pk/2400
ADD TO CART 
Flexible polyolefin labels - Cryo-Babies®
Flexible polyolefin labels - Cryo-Babies®
LASER CRYO LABELS for -196°C to 150°C

Cryo-Tags® and Cryo-Babies® are made of flexible polyolefin labels and they withstand conventional and cryogenic storage conditions (vapour and liquid phase nitrogen storage at -196°C ). They are chemically inert with a solvent resistant acrylic adhesive which adheres to most plastics, glass and metals. They withstand boiling water baths at 100°C and dry heat up to 150°C without cracking, peeling or degrading.
The labels resist most detergents and oils, as well as many organic solvents, caustic agents and other challenges without peeling. They resist water soaking for at least 24 hours at room temperature and water vapour (100% relative humidity) at 35°C for at least 24 hours.
The label sheets are specially designed to permanently accept laser printing.
Sheet size is 216 x 279mm (US Letter size when printing).

The rainbow pack includes 4 sheets each of blue, green, red and yellow.


100% Virgin polypropylene tubes are recommended. Avoid the use of siliconised surfaces.

I102 Cryo-Babies® are ideal for 0.5mL tubes, 119 labels/sheet
I103 Cryo-Babies® are ideal for 1.5mL tubes, 85 labels/sheet

I102-B
Laser Cryo-Babies®, 24 x 13mm, blue
AUD126.00
pk/2380
BACKORDER 
I102-G
Laser Cryo-Babies®, 24 x 13mm, green
AUD126.00
pk/2380
BACKORDER 
I102-R
Laser Cryo-Babies®, 24 x 13mm, red
AUD126.00
pk/2380
ADD TO CART 
I102-W
Laser Cryo-Babies®, 24 x 13mm, white
AUD126.00
pk/2380
ADD TO CART 
I102-Y
Laser Cryo-Babies®, 24 x 13mm, yellow
AUD126.00
pk/2380
BACKORDER 
I102-Z
Laser Cryo-Babies®, 24 x 13mm, rainbow
AUD126.00
pk/2380
BACKORDER 
I103-B
Laser Cryo-Babies®, 33 x 13mm, blue
AUD126.00
pk/1700
BACKORDER 
I103-G
Laser Cryo-Babies®, 33 x 13mm, green
AUD126.00
pk/1700
ADD TO CART 
I103-R
Laser Cryo-Babies®, 33 x 13mm, red
AUD126.00
pk/1700
ADD TO CART 
I103-W
Laser Cryo-Babies®, 33 x 13mm, white
AUD126.00
pk/1700
ADD TO CART 
I103-Y
Laser Cryo-Babies®, 33 x 13mm, yellow
AUD126.00
pk/1700
BACKORDER 
I103-Z
Laser Cryo-Babies®, 33 x 13mm, rainbow
AUD126.00
pk/1700
ADD TO CART 
General purpose laser labels
General purpose laser labels
LASER CRYO-TAGS®

The larger Cryo-Tags® are ideal for bottles & beakers, cryovials and general purpose.

Sheet size is 216 x 279mm (US Letter size when printing). These labels withstand liquid N2 and autoclaving -

see Cryo-Babies®

Cat. No.Labels per sheetLay out acrossLayout down
I1238605

12

I124352413
I1276
1244
I1238-B
Laser Cryo-Tags®, 38 x 19mm, blue
AUD127.00
pk/1200
ADD TO CART 
I1238-G
Laser Cryo-Tags®, 38 x 19mm, green
AUD127.00
pk/1200
BACKORDER 
I1238-R
Laser Cryo-Tags®, 38 x 19mm, red
AUD127.00
pk/1200
ADD TO CART 
I1238-W
Laser Cryo-Tags®, 38 x 19mm, white
AUD127.00
pk/1200
BACKORDER 
I1238-Y
Laser Cryo-Tags®, 38 x 19mm, yellow
AUD127.00
pk/1200
ADD TO CART 
I1238-Z
Laser Cryo-Tags®, 38 x 19mm, rainbow
AUD127.00
pk/1200
BACKORDER 
I1243-B
Laser Cryo-Tags®, 43 x 19mm, blue
AUD127.00
pk/1040
ADD TO CART 
I1243-G
Laser Cryo-Tags®, 43 x 19mm, green
AUD127.00
pk/1040
ADD TO CART 
I1243-R
Laser Cryo-Tags®, 43 x 19mm, red
AUD127.00
pk/1040
ADD TO CART 
I1243-W
Laser Cryo-Tags®, 43 x 19mm, white
AUD127.00
pk/1040
ADD TO CART 
I1243-Y
Laser Cryo-Tags®, 43 x 19mm, yellow
AUD127.00
pk/1040
ADD TO CART 
I1243-Z
Laser Cryo-Tags®, 43 x 19mm, rainbow
AUD127.00
pk/1040
BACKORDER 
I1276-W
Laser Cryo-Tags®, 76 x 51mm, white
AUD127.00
pk/240
ADD TO CART 
Cryo labels on a roll
Cryo labels on a roll
CRYO-BABIES® AND CRYO-TAGS® ON A ROLL

Convenient - Dispensing box assists in labelling individual tubes used in small experiments.
Easy to write on - PVC labels accept writing from most lab markers including solvent resistant pens.

These labels withstand liquid N2 and autoclaving - see Cryo-Babies®

I102-W-R
Cryo-Babies®, 24 x 13mm, white
AUD71.00
roll/1000
ADD TO CART 
I103-W-R
Cryo-Babies®, 33 x 13mm, white
AUD71.00
roll/1000
ADD TO CART 
I1238-W-R
Cryo-Tags®, 38 x 19mm, white
AUD73.00
roll/1000
BACKORDER 
Culture plate laser label
Culture plate laser label
LASER CRYO-TAGS® FOR MICROPLATES

The 38 x 6mm labels are ideal for culture plates, 156 labels/sheet.

These labels withstand liquid N2 and autoclaving - see Cryo-Babies®

I1338-B
Laser Cryo-Tags®, 38 x 6mm, blue
AUD127.00
pk/3120
ADD TO CART 
I1338-G
Laser Cryo-Tags®, 38 x 6mm, green
AUD127.00
pk/3120
ADD TO CART 
I1338-R
Laser Cryo-Tags®, 38 x 6mm, red
AUD127.00
pk/3120
ADD TO CART 
I1338-W
Laser Cryo-Tags®, 38 x 6mm, white
AUD127.00
pk/3120
ADD TO CART 
I1338-Y
Laser Cryo-Tags®, 38 x 6mm, yellow
AUD127.00
pk/3120
ADD TO CART 
I1338-Z
Laser Cryo-Tags®, 38 x 6mm, rainbow
AUD127.00
pk/3120
ADD TO CART 
Cryotube laser label and spot sets
Cryotube laser label and spot sets
LASER CRYO-TAGS® TOUGH-SPOT SET

These label sets are ideal for 1.5mm cryotubes, 68 labels per sheet.
The set comprises a 33 x 13mm label for the tube and a Ø 9.5mm spot for the cap.

These labels withstand liquid N2 and autoclaving - see Cryo-Babies®

I1433-SET
Laser Cryo-Tags® Tough-Spot Set, 33 x 13mm with 9.5mm spot, white
AUD126.00
pk/1360
BACKORDER 
Temperature Resistant Tough-Tags®
Temperature Resistant Tough-Tags®
CRYO LABLES TOUGH-TAGS®

Temperature Resistant ‐ From ‐196°C to 80°C

These labels adhere to Cryotubes (page Y‐1) and small centrifuge tubes.

Save Time ‐ Pre‐printed Tough‐Spots with numbers 1 to 10, make labelling and identifying samples quick and easy. Use the numbered Tough‐Spots to identify a series of samples ‐ no handwriting or printing needed.

Colour Coded ‐ Each colour coded ToughSpot has a distinctly different colour to identify similar samples and also includes a white area to add notes.

I29-10
Cryo Tough-Spots®, printed 1 - 10
AUD55.00
roll/1000
BACKORDER 
I29-11-B
Cryo Tough-Spots®, 11mm, bullseye, dark blue
AUD76.00
roll/1000
BACKORDER 
I29-11-C
Cryo Tough-Spots®, 11mm, bullseye, copper
AUD76.00
roll/1000
BACKORDER 
I29-11-G
Cryo Tough-Spots®, 11mm, bullseye, dark green
AUD76.00
roll/1000
BACKORDER 
Temperature-resistant adhesive labels
Temperature-resistant adhesive labels
Clear laser labels
Clear laser labels
LASER CRYO-CLEAR™ LABELS

Contents of vials under labels remain visible. Temperature-resistant from -196°C to 70°C. Cryo-Clear™ labels remain fully adhered down to -196°C (liquid and vapour phase nitrogen).


Durable - Chemically inert labels resist most organic solvents and caustic agents. Labels adhere to plastics*, glass and metals without cracking, peeling or degrading.

Laser printable - Label sheets are specially top-coated to accept laser printing and other markings. Heat-resistant, stay-flat sheets will not jam in laser printers.

Innovative - Made with a flexible, vinyl label material and permanent acrylic adhesive. This unique combination expands and contracts together as temperatures fluctuate resulting in a strong and sustained adhesive bond.

* NOTE: Siliconised surfaces should be avoided. Apply to clean, dry tubes at room temperature. Tubes made of 100% virgin polypropylene are recommended.

Sheet size is 216 x 279mm (US Letter size when printing).

I1624-C
Laser Cryo-Clear™, 24 x 13mm, clear
AUD130.00
pk/2380
ADD TO CART 
I1633-C
Laser Cryo-Clear™, 33 x 13mm, clear
AUD132.00
pk/1700
BACKORDER 
Microscope slide cryo label
Microscope slide cryo label
LASER CRYO-TAGS® FOR MICROSCOPE SLIDES

The 25 x 25mm cryo labels are ideal for microscope slides, 80 labels per sheet.

These labels withstand liquid N2 and autoclaving - see Cryo-Babies®

I1525-W
Laser Cryo-Tags®, 25 x 25mm, white
AUD127.00
pk/1600
BACKORDER 
WetGrip labels for frost-covered, frozen
WetGrip labels for frost-covered, frozen
Labels for wet surfaces
Labels for wet surfaces
LASER WETGRIP LABELS

Labels for wet and frozen surfaces, in 4 sizes to cater for most needs.
I17‐22 is ideal for microscope slides
I17‐24 is ideal for 0.5mL tubes ‐ Template 7 Across 17 Down (119 per page)
I17‐33 is ideal for 1.5mL tubes
I17‐38 is ideal for 1.5 ‐ 2mL tubes ‐ Template 5 Across 12 Down (60 per page)

For printers without a good letter size setting, cutting the widths of sheets to A4 may be simplest.


Features

  • Labels adhere to wet, frost‐covered and frozen surfaces
  • Temperature range ‐40°C to 100°C
  • Compatible with centrifuge rotors
  • Resistant to chemicals and solvents
  • Labels adhere to plastics, glass, metals and even paperboard boxes
  • Laser sheets for printing many labels at once. White, 20 sheets/pack
I17-22
Laser WetGrip labels, 22 x 22mm
AUD137.00
pk/2400
ADD TO CART 
I17-24
Laser WetGrip labels, 24 x 13mm
AUD137.00
pk/2380
ADD TO CART 
I17-33
Laser WetGrip labels, 33 x 13mm
AUD137.00
pk/1700
ADD TO CART 
I17-38
Laser WetGrip labels, 38 x 19mm
AUD137.00
pk/1500
ADD TO CART 
Laser Wash-Off™ dissolvable labels
Dissolvable labels
1 = 0 sec, 2 = 15 sec, 3 = 30 sec
LASER WASH-OFF™ LABELS

Labels dissolve under running water in less than 30 seconds, leaving no adhesive residue.
Easy removal - Labels wash off in 1 rinse cycle at any water temperature
Environmentally safe - 100% biodegradable and FDA compliant
Autoclavable- Labels resist exposure to steam* at 121°C
Temperature resistant - Long term storage best between 0°C to 21°C.
Laser printable - Sheets work with standard laser printers

*A build-up of liquid water on the label surface will dissolve the material.

I18-067
Laser Wash-Off™ labels, 67 x 25mm
AUD203.00
pk/750
ADD TO CART 
I18-102
Laser Wash-Off™ labels, 102 x 25mm
AUD203.00
pk/500
ADD TO CART 
Sticky Tabs SEM adhesive
IA022
STICKY TABS

For adhesion of SEM specimens

Very convenient self-adhesive tabs. May be applied to the surface of SEM specimen mounts, then with the backing peeled off, a sticky surface remains for mounting specimens. Sticky tabs provide a good, clean method for collecting samples in the field. Also useful for mounting photographs.
Dimensions: 21 x 11mm.

IA022
Sticky Tabs, SEM adhesive
AUD9.00
pk/216
ADD TO CART 
IA0226
Sticky Tabs, SEM adhesive
AUD58.00
pk/2592
ADD TO CART 
Lift-N-Press SEM adhesive
IA030
LIFT-N-PRESS

For adhesion of SEM specimens

Adhesive tabs similar to the above sticky tabs. These offer a smoother background with a higher strength adhesive. These tabs leave a flat and complete circle of adhesive that is more suitable for holding small particles in place and are recommended for gunshot residue testing.
500 tabs/roll, 16 x 13mm.

IA030
Lift-N-Press, SEM adhesive
AUD108.00
roll
ADD TO CART 
Radiation warning dots
I130
RADIOACTIVE WARNING DOTS

Adhesive paper

Supplied on a tape roll and are peeled off as needed. There are 1000 dots per roll. Each dot is with the radiation symbol on a yellow background. Colour coding complies with the OSHA regulations.

I130
Radiation warning dots, 6.35mm
AUD79.00
roll
BACKORDER 
IA023 and IA024, with a G040 pin stub mounted with IA023
IA023 and IA024, with a G040 pin stub mounted with IA023
CARBON TABS

For adhesion of SEM specimens

May be used in place of conductive adhesives in certain applications. 30µm thick. 35µm conductive glue on one side and 40µm conductive glue on the other. Glue can be removed with ethyl acetate, ethanol or isopropanol. Temperature resistant up to 140°C. Small impurities of Si, Sb, Fe, Mg and Na may be found.

IA023
Carbon tabs, 12mm
10% DISCOUNT FOR 10
AUD34.00
pk/100
ADD TO CART 
IA023-9
Carbon tabs, 9mm
10% DISCOUNT FOR 10
AUD33.00
pk/100
ADD TO CART 
IA024
Carbon tabs, 25mm, SEM adhesive
10% DISCOUNT FOR 10
AUD53.00
pk/54
ADD TO CART 
Double-sided carbon tape, SEM adhesive
IA020
CARBON TAPE

For adhesion of SEM specimen

Conductive double-sided sticky carbon tape. For applications in SEM where conductivity is required or for X-ray uses. Solid surface so that samples will not sink. In SEMs BS or secondary mode, a uniform dark background results. 20m long and 0.16mm thick.

IA020
Double-sided carbon tape, 7mm wide
AUD21.00
roll/20m
ADD TO CART 
IA0201
Double-sided carbon tape, SEM adhesive, 12mm wide
AUD37.00
roll/20m
ADD TO CART 
IA0202
Double-sided carbon tape, SEM adhesive, 25mm wide
AUD66.00
roll/20m
ADD TO CART 
Double-sided tape
IA021
DOUBLE-SIDED ADHESIVE TAPE

Now with an easy to remove backing strip. A simple and effective means for fastening many SEM samples or for mounting photographs. 12mm wide, in 33m rolls.


For SEM use specimens mounted using simple double sided tape require coating with a conductor.

IA021-24
Double-sided tape, 24mm x 33m
10% DISCOUNT FOR 10
AUD15.00
roll
ADD TO CART 
Kapton® polyimide tape
Kapton® polyimide tape
KAPTON® POLYIMIDE TAPE

Single-sided

This single‐sided Kapton® polyimide film possesses a unique combination of properties that make it ideal for a variety of applications in many different industries. The ability of Kapton® to maintain its excellent physical, electrical, and mechanical properties over a wide temperature range has opened new design and application areas to plastic films. electrical and electronic insulation applications: wire and cable tapes, formed coil insulation, substrates for flexible printed circuits, motor slot liners, magnet wire insulation, transformer and capacitor insulation, magnetic and pressure‐sensitive tapes, and tubing.


The film itself is not soluble in any solvents and offers a still greater temperature range from absolute zero to 400°C.


Features

  • antistatic
  • thermally conductive
  • polyimides for fine line circuitry
  • cryogenic insulation
  • corona resistant
  • pigmented for colour
  • insoluble in any organic solvent
  • not flammable
  • high mechanical strength

Technical note for 3M tape with silicon glue.

Extensive Kapton technical information

IA031-06
Kapton® polyimide tape, single-sided, 6.3mm wide x 32.9m
AUD24.00
32.9m
ADD TO CART 
IA031-12
Kapton® polyimide tape, single-sided, 12.7mm wide x 32.9m
AUD42.00
32.9m
ADD TO CART 
IA031-19
Kapton® polyimide tape, single-sided, 19mm wide x 32.9m
AUD55.00
32.9m
BACKORDER 
IA031-25
Kapton® polyimide tape, single-sided, 25.4mm wide x 32.9m
AUD72.00
32.9m
BACKORDER 
IA031-50
Kapton® polyimide tape, single-sided, 50.8mm wide x 32.9m
AUD140.00
32.9m
BACKORDER 
RockerTape™ double-sided adhesive tape
Tape
RockerTape™ double-sided adhesive sheets
Sheets
ROCKER TAPE, DOUBLE-SIDED ADHESIVE FILM
Double-sided adhesive film for laboratory container mounting.
Features
  • Convenient - No more fumbling with clamps
  • Versatile - Use with rockers, shakers, incubators or nutators
  • Strong - Easily rock and roll up to 300rpm and beyond*
  • Long lasting - Re-usable based on load capacity and vessel number
  • Resistant - Keeps on rocking even in the prescence of most solvents and caustic agents


* RPM limits may vary based on load and vessel contact area. Test load recommended.

IA035-R
RockerTape™, double-sided adhesive tape, 38mm x 6m
AUD73.00
6m
BACKORDER 
IA035-S
RockerTape™, double-sided adhesive sheets, 305 x 305mm
AUD86.00
pk/3
ADD TO CART 
IA025
Silver polyester tape, non-conductive, 9.5mm wide
AUD52.00
roll
BACKORDER 
Aluminium tape
IA026
Copper tape with adhesive backing
IA027
Double-sided adhesive copper tape
IA028
METAL CONDUCTIVE TAPES

Single or double adhesive surface

3M® aluminium and copper tapes, core diameter is 76mm. These tapes are electrically conductive through a pressure sensitive acrylic adhesive. As the tape is applied, conductive particles in the adhesive bridge the gap between the backing and the substrate.

Foil thickness 0.051mm
Total thickness 0.102mm
Electrical resistance through adhesive 0.07 (ohms/cm²)

IA026
Aluminium tape, adhesive backing, 6.3mm x 16.4m
AUD44.00
roll
ADD TO CART 
IA027
Copper tape, adhesive backing, 6.3mm x 16.4m
AUD44.00
16.4m
ADD TO CART 
IA028
Copper tape, double-sided adhesive, 12.7mm wide x 16.4m
AUD96.00
16.4m
ADD TO CART 
Parafilm M
IA041
PARAFILM, M

Parafilm M is ideal for scientific laboratory work. It is a thermoplastic, sealing film. It holds moisture loss to a minimum and offers excellent protection for the contents of flasks, culture tubes and Petri dishes.
The sell unit of IA040 is now 2 rolls/38m.

IA040
Parafilm M, 50mm x 76m
AUD54.00
76m
ADD TO CART 
IA041
Parafilm M, 100mm x 38m
AUD53.00
38m
ADD TO CART 
Dental wax
Dental wax
DENTAL WAX
For sealing boats to glass knives for microtomy and as a disposable hydrophobic surface for single drop staining.

There are approximately 25-30 sheets per 500g.
Each sheet is approximately 160 x 80 x 2mm (L x W x thickness).
IL058
Dental wax
10% DISCOUNT FOR 6
AUD33.00
500g
ADD TO CART 
Order Type / Payment Method / Address / Shopping Cart / Checkout