The following information can be found on the VITLAB website www.vitlab.de
- Technical information
- Instruction manuals
- Declarations of suitability for use with foodstuffs
- Products available in sterile packaging
- Single and multichannel micropipettes contain PP and PC parts; they can be used with chemicals compatible with these
- Comprehensive plastics physical chemical properties tables
Easy-squeeze wash bottles. Dispensing tip is provided with PE cap and can be cut back to increase flow.
Integral wash bottles made of low density polyethylene, with removable dispensing tip and 5 graduations (50mL/100mL). The tip can be trimmed to make a bigger hole.
Wash bottles made of low density polyethylene. The dispensing tube is fitted with a fine, removable tip.
|Height (mm)||Bottle OD (mm)|
LABELLED WASH BOTTLES
Made by VITLAB, Germany
Wide neck VITsafe™ wash bottles made of PP or low density PE; name of solvent is printed on the bottle which eliminates the risk of dispensing the wrong liquid. Temperature changes in a laboratory can often cause conventional wash bottles to leak or drip due to the resulting increase in internal pressure. The patent‐registered, metal‐free VENT‐CAP screw closure of the VITsafe™ safety wash bottle virtually prevents this.
Types / Sizes:
|Imprint||Colour VENT‐CAP||Volume (mL)||Thread (GL)||Height* (mm)||⌀ (mm)||PU||Cat. No.|
|Methyl ethyl ketone (MEK)||red||500||45||166||76||6||L7ME‐500|
*Height without the spray tube
The small polypropylene bottles with valve/ dropper cap, which we use for silver liquid and immersion oils, are available for laboratory use.
Polyethylene dropper bottles. Removable dropper tips allow refilling. Screw on polypropylene cap. Dropper control tip snaps into place for a secure fit. Leak proof even under pressure.
Low density polyethylene dropper bottles, which dispense small, uniform drops of liquids when pressed lightly.
LDL22-060: Height with cap 93mm, OD 45mm
LDL22-125: height with cap 105mm, OD 50mm
Aspirator bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable, durable & dependable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged before autoclaving.
Strong, rigid polypropylene reagent bottles with leak-proof ring seal screw cap.
Height with cap (mm)
Bottle OD (mm)
Neck ID (mm)
Semi-transparent, wide neck, PP reagent bottles with screw caps.
Made by VITLAB, Germany.
|Thread (GL)||Height (mm)||Ø (mm)|
Made by VITLAB, Germany. Semi-transparent, wide neck, PP reagent bottles with NS stoppers.
Well fitting conical stoppers are exceptionally tight and hold volatile solvents well.
|NS-Stopper||Height (mm)||Ø (mm)|
Polyethylene with PP cap
Caps are made of PP.
|Neck ID (mm)|
|76||45.5||High density PE|
|112||55||Low density PE|
|112||88.5||High density PE|
|165||88.5||Low density PE|
Polyethylene with PP caps
Caps are made of PP.
|Cat. No.||Volume (mL)|
Neck ID (mm)
|Height (mm)||Width (mm)||PE|
|79||46||High density PE|
|83||78.5||High density PE|
|117||90||High density PE|
|51||165||86||Low density PE|
Leak-proof, amber HDPE bottles with a narrow neck, for storing and shipping light-sensitive liquids.
|Cat. No.||Volume (mL)||Height with cap (mm)||Bottle OD (mm)||Neck ID (mm)|
Leak-proof, amber HDPE bottles with a narrow neck, for storing and shipping light-sensitive liquids and powders.
|Volume (mL)||Height with cap (mm)||Bottle OD (mm)||Neck ID (mm)|
Amber high density polyethylene bottles, wide neck, with screw cap.
Dimensions: W112 x D52 x H180mm (including cap).
Type III amber glass bottle with PP screw finish. Caps available separately.
White ring seal cap L6217-CAP suits this bottle.
|Cat. No.||Volume (mL)||Height w/o cap (mm)||Neck OD (mm)||Bottle OD (mm)|
BOTTLES, AMBER GLASS TYPE III
With optional dripolator plug
Amber glass bottles with 18mm neck. Can be used as dropper bottles with the high flow dripolator plug. The tamper proof cap can be used separately or on top of the plug. Caps and dripolator plugs are available separately.
Special: The 100mL bottles are available at a very competitive price!
Bottle OD (mm)
Inexpensive, disposable aluminium foil dishes with crimped sides, flat smooth bottoms and a finger tab handle on the rim. They may be used for routine weighing and moisture testing, as well as an embedding mould. They can be heated.
L144-70 has smooth sides
L144-75 has extra high sides
Clean, smooth surface and available in contrasting black or white, made from high impact, anti-static polystyrene. PS is dimensionally stable and the dishes are most economical; suitable for liquids and solids. They are ideal for weighing many substances, but they are usable to 70°C only; aluminium dishes or PTFE watch glasses are higher temperature alternatives.
These weighing boats are made of anti static, high impact polystyrene; they are suitable for liquids and solids.
For weighing, mixing and covering vessels. Superior chemical, mechanical and heat resistance; white. Easy to clean and hydrophobic.
Temperature resistance: from -200°C to +250°C.
White PP measuring spoons with straight edge, flat tops and bottoms. The volume is marked on the handle.