t11add2
PICK-UP LOOPS, DIAMOND PEN/SCRIBES, DISC PUNCH, DIP MISER, CELL COUNTERS. P
ASK
Perfect loop set
T063
PERFECT LOOP
The Perfect Loop is used to easily place ultra-thin sections on specimen grids without folds.

1. Center the loop above the sections

2. Slowly lower the loop over the sections and touch the water

3. Gently lift up the loop with the sections in a droplet of water

4. Lower the loop onto a grid and lift up again

5. The grid holds to the loop by surface tension

6. Lower the loop to the filter paper to remove water

7. For coated grids, touch with filter paper to remove water

8. Separate the grid from the loop with an eyelash
T063
Perfect loop set
AUD163.00
set
BACKORDER 
T064
Perfect loop (loop only)
AUD107.00
ea
ADD TO CART 
Wire needle holder
Fibre and needle holder
FIBRE & LOOP TOOL

A useful device, especially for ultramicrotomy. Made of stainless steel, with a fine chuck able to hold thin wires and even hairs as well as needles.
Loops are great for picking up sections in ultramicrotomy and then placing these, free of wrinkles on grids or microscope slides.

T065
Wire needle holder, SS
AUD15.00
pk/2
ADD TO CART 
Kolle handle and two loops
Kolle handle and two loops
Kolle Handle Blades / Lancet
T067-B Blades (lancet) the lancet is 8mm long
KOLLE HANDLE, LOOPS & NEEDLES

Kolle type handle, length 200mm or 290mm with bakelite grip; excellent when heat-sterilising loops or needles. Overall length of nichrome loops, needles and lancets is 50mm.
The lancet is pointed but not sharp. It could be sharpened for dissecting purposes.

T067
Kolle handle, 200mm, with two 3mm nichrome loops
AUD12.00
ea
ADD TO CART 
T067-B
Blades (lancet) for Kolle handle
AUD17.00
pk/5
ADD TO CART 
T067-L
Nichrome loops, 3mm, for Kolle handle
10% DISCOUNT FOR 10
AUD17.00
pk/5
ADD TO CART 
T067-N
Needles, 50mm, for Kolle handle
10% DISCOUNT FOR 10
AUD17.00
pk/5
ADD TO CART 
T0679
Kolle handle, 290mm, with two 3mm nichrome loops
AUD13.00
ea
ADD TO CART 
Nichrome loops
T066/15/ 35/ 50
LOOPS

These well made nichrome wire (0.25mm thick) loops may be inserted into a needle-holder or glued to any handle. Three different diameter loops are available. All are 63mm long. Pkt/3.

T066-15
Nichrome loops, 1.5mm ID, 63.5mm long
AUD19.00
pk/3
BACKORDER 
T066-35
Nichrome loops, 3.5mm ID, 63.5mm long
AUD19.00
pk/3
BACKORDER 
T066-50
Nichrome loops, 5.0mm ID, 63.5mm long
AUD16.00
pk/3
ADD TO CART 
ABS sterile inoculating loops
T06-L10
INOCULATING LOOPS, ABS

High-strength ABS loops are smooth and flexible to facilitate uniform streaking without damaging the gel surface. Being both sterile and disposable eliminates any risk of cross contamination. All loops are free of lubricants and do not contaminate media.
Available in convenient peel pouch, 20 loops/pouch. Pk/100 = 5 pouches.

T06-L10
Inoculating loops, ABS, sterile, 10µL
20% DISCOUNT FOR 10
AUD13.00
pk/100
ADD TO CART 
Cell spreaders
Cell spreaders
CELL SPREADERS, PP, TRIANGLE-SHAPED, STERILE

Designed for spreading and dispersing liquids across the surface of agar culture plates. These triangle-shaped spreaders have smooth rounded surfaces to prevent any cutting or gouging of agar during inoculation of culture plates. Cross-shaped loop shaft improves grip and assists orientation, making diluting and streaking easy. Autoclavable.

T061-30
Cell spreaders, PP, triangle-shaped, sterile, 208 x 30mm
10% DISCOUNT FOR 5
AUD36.00
pk/100
ADD TO CART 
T061-60
Cell spreaders, PP, triangle-shaped, sterile, 235 x 60mm
AUD42.00
pk/100
ADD TO CART 
Diamond glass scorer and cutter
T962-120
DIAMOND SCRIBE, 120° TIP

Stout tip for scoring, cutting and bold markings.

T962-120
Glass scorer/cutter, 150mm handle, 120° diamond tip
10% DISCOUNT FOR 10
AUD27.00
ea
ADD TO CART 
DIAMOND-TIPPED SCRIBES

Our scribing tools feature the best surface finish attainable. This finish creates an optimum cutting edge ensuring high accuracy and long life. Our scribes are used widely for scoring and scribing on glass and other materials; they are dominant in the Semi Conductor and Fibre Optic markets.
Obtuse (wide) diamond cutting angles are more durable and may be used for scoring and bold markings. Finest markings are made with tools using an acute (sharp) angle. Two of these are in the section with the micro-tools on page T5.

t11add1
Diamond-tipped Scribes
ASK
Diamond scribe
T961-90S
Diamond scribe
T961-90A
DIAMOND SCRIBE, 90° TIP

The diamond’s cutting tip is more pointed for finer glass marking and scoring of thin glass. The exposed thin tip is useful for precise positioning; it requires and tolerates low pressure only. Angled shanks facilitate natural pen handling, with the diamond in the vertical position. These pens do not use a refill.

T961-90A
Diamond scribe, 150mm handle, 90° tip, angled
10% DISCOUNT FOR 10
AUD28.00
ea
BACKORDER 
T961-90S
Diamond scribe, 150mm handle, 90° tip, straight
10% DISCOUNT FOR 10
AUD28.00
ea
ADD TO CART 
Diamond pen
T058, T059
DIAMOND PEN, 105° TIP

A high quality black pen for marking and cutting glass plates or slides. Durable and functional.
This diamond-tipped scribe tool is made from natural diamond material and a retractable pen body. Tip angle is 105° and refills are available.

T058
Diamond pen, retractable, 105°
10% DISCOUNT FOR 10
AUD33.00
ea
ADD TO CART 
T059
Diamond pen refill
10% DISCOUNT FOR 10
AUD20.00
ea
ADD TO CART 
Disc punch
Disc punch
DISC PUNCHES

SEM: for placing adhesive tapes or sheet material on specimen mounts, punch a conveniently shaped circle.
TEM: punch circles from ACLAR film for growing cells and then mounting on a rod-type holder end, for ultramicrotomy.
AFM: specimen support discs.

Maximum thickness for punching is 1.7mm.

AFM supplies are on page G9

T547-07
Disc punch, 7.9mm circle
AUD117.00
ea
BACKORDER 
T547-09
Disc punch, 9.5mm circle
AUD117.00
ea
ADD TO CART 
T547-11
Disc punch, 11.1mm circle
AUD123.00
ea
BACKORDER 
T547-12
Disc punch, 12.7mm circle
AUD120.00
ea
BACKORDER 
Ampoule breaker
TL151
AMPOULE BREAKER

Made from soft silicone rubber. A simple way to break pre-scored ampoules, reducing the chance of injury and spillage. Takes 5 - 10mL ampoules.

TL151
Ampoule breaker
AUD41.00
ea
ADD TO CART 
Break-Safe™ ampoule opener
TL152
BREAK-SAFE™ AMPOULE OPENER

Break-Safe™ ampoule opener allows safe, one-handed opening of up to 3 ampoules at one time. Gently pressing down on the lid snaps ampoule necks clean, while keeping them contained within the device and away from fingers. After removing ampoule contents, simply turn the device upside down over a waste receptacle to safely discard ampoules and tops.

Features

  • Includes 4 inserts to allow opening of 1mL, 2mL, 5mL and 10mL ampules
  • Opens ampoules easily and safely
  • Transparency allows unobstructed viewing of ampoule contents at all times
  • Copolyester plastic construction has broad chemical resistance
TL152
Break-Safe™ ampoule opener
AUD96.00
ea
ADD TO CART 
Dip miser slide coating set
T083
DIP MISER FOR COATING SLIDES

Slide coating cup with stand and cleaning brush. Glass cup is Pyrex and is designed to conserve expensive autoradiographic emulsion when coating glass slides. Needs only ¼ the volume of solution otherwise required. Single-piece holder permits immersion in a water bath and provides a stable darkroom stand to prevent spills. 10ml capacity.


Brush dimensions: total length 152mm, diam. 12.7mm, bristle part 57mm.

T083
Dip miser slide coating set
AUD152.00
ea
ADD TO CART 
T084
Dip miser cup replacement
AUD100.00
ea
ADD TO CART 
T085
Dip miser cleaning brushes
AUD25.00
pk/2
ADD TO CART 
One cell tally counter
TT01-X
Two cell tally counter
TT02
Six cell tally counter/totaliser
TT06
Eight cell type counter/totaliser
TT08
TALLY COUNTER

Totalisers / Lab Counters / Cell Counter

An intuitive differential cell counter that simplifies blood cell counts.

  • The key legend strips are easily removed to allow customisation (TT05, TT06 and TT08)
  • Sturdy solid construction with firm dependable keys

One Cell Tally Counter
One Counting Unit Tally Counter. A chrome plated with counter with a flange (63.5mm dia.) for desktop mounting. The recording lever is on the right side and the reset knob on the top. The counter is ideal for serial sectioning work. Four digit place.


Two Cell Tally Counter
A counter with two counting keys each with 0 to 999 range with a single reset knob. It comes with removable tabs for top identification.


Five Cell Type Counter/Totaliser
5 Place set to count Basophils, Eosinophils, Seg., Lymphocytes, Monocytes
When a total of 100 cells is counted, a bell rings. The percentage of each type of cell can then be read directly from the window above each key. A simple counter-clockwise rotation of the end knobs will zero all the counts.
Each key has the name and picture of a particular cell above it, representing groups of leucocytes.


Six Cell Tally Counter/Totaliser
A counter with five keys and one totalise unit (0 to 999), which records the total number of strokes made on other keys. At 100 increments, totalising unit rings bell. When totalising unit records 100, each figure corresponding to individual keys automatically displays percentage. Two reset knobs, removable tabs on top of counter provide area for identification of classification being counted.


Eight Cell Type Counter/Totaliser
8 Place set to count Basophils, Eosinophils, Myelophils, Juven., Stab., Seg., Lymphocytes, Monocytes
When a total of 100 cells is counted, a bell rings. The percentage of each type of cell can then be read directly from the window above each key. A simple counter-clockwise rotation of the end knobs will zero all the counts.
Each key has the name and picture of a particular cell above it, representing groups of leucocytes.

TT01-X
One cell tally counter
10% DISCOUNT FOR 5
AUD15.00
ea
ADD TO CART 
TT02
Two cell tally counter
10% DISCOUNT FOR 5
AUD201.00
ea
BACKORDER 
TT05
Five cell type counter/totaliser
AUD430.00
ea
BACKORDER 
TT06
Six cell tally counter/totaliser
25% DISCOUNT FOR 1
AUD562421.50
ea
ADD TO CART 
TT08
Eight cell type counter/totaliser
AUD462.00
ea
BACKORDER 
Puffers rubber blower / duster
T090, T091
PUFFERS

Natural rubber blower (eco duster) with 10cm tubing on one end. Used for eco dusting surfaces such as negatives, specimens and microscope parts. A two-way valve prevents suck-back, and the rubber nozzle prevents scratches on the surface to be cleaned.

T090
Puffer, 75cc
AUD32.00
ea
ADD TO CART 
T091
Puffer, 45cc
AUD26.00
ea
BACKORDER 
Tweezers holder
T052
TWEEZERS HOLDER

Holds 6 tweezers. Keeps tips protected in an easy-to-reach position.

T052
Tweezers holder
AUD45.00
ea
BACKORDER 
Order Type / Payment Method / Address / Shopping Cart / Checkout