LN2 Storage Dewars

We also supply Semen counting cells and well slides for checking semen viability.




Our storage Dewars boast extraordinary insulation, and therefore holding times, before LN2 replenishing is required. Best holding times are achieved by minimising the contact areas at the neck and support of the inner flask against the outer housing. Dewars with large neck openings have shorter holding times, but afford better access.

Consequently storage vessels (YD2), with the exception of the small 2 and 5 litre Dewars, are most used for the storage of semen or other specimen. These long storage time Dewars are not well suited for transport and they should not be tipped when full. Holding time is reduced with increased storage loads and the number of rods used to hold immersed specimens.

Remember that storage containers (except 2 and 5 litres), when full, must not be transported on a truck or tipped to decant some contents.

Our Dewar vessels are all aluminium, except where stated otherwise, making them light. This material has low specific heat (wastes less N2 when filling), and the natural Al oxide layer is extremely chemically inert. The design prevents denting of the outer housing.

Note: Total LN2 evaporation is the number of days from filling the Dewar, without decanting any, until all liquid N2 has dissipated.

y3add1
LN2 Dewars
ASK
Cryogenics Liquid Nitrogen Transfer Vessels

DEWARS WITH HANDLES

These dewars are ideal for temporary storage of liquid gas in laboratory settings. These wide mouth cylindrical flasks have a convenient handle. These dewars can afford the increased portability, pouring efficiency and added protection. They provide safe extended temperature retention for specimens stored in liquid nitrogen, and thus have a broad range of applications in industrial, educational, and clinical fields.


Features

  • Aluminium metal housing extends full length of Dewar for added protection.
  • The Dewar lip is extended to facilitate pouring.
  • Polyethylene stopper, specially vented, minimises evaporation.
  • Holding time 2-6 hours depending on volume.

 Outer Diameter (mm)Height (mm)Inner Diameter (mm)Depth / Inside Height (mm)
YD1-1000-035120177100145
YD1-1000-035
Dewar vessel, liquid nitrogen, 1L
AUD381.00
ea
ADD TO CART 
Shallow Wide Mouth Flasks
DEWAR FLASK

shallow wide mouth, hemispherical

  • Convenient dish‐shaped design is ideal for bench top use with crushed ice, dry‐ ice, or alcohol
  • Also great as a hot liquid container
  • Stainless steel jacket and cushioned base will provide years of trouble‐free use
  • Excellent for use as a cold trap
ProductCapacity (mL)I.D. (mm)O.D. (mm)Height (mm)
YEMS61892‐0550011415295
YEMS61892‐101000137178105
YEMS61892‐191900152184140
YEMS61892-05
Shallow wide mouth flask, 500mL
AUD662.00
ea
BACKORDER 
YEMS61892-10
Shallow wide mouth flask, 1000mL
AUD711.00
ea
BACKORDER 
YEMS61892-19
Shallow wide mouth flask, 1900mL
AUD728.00
ea
ADD TO CART 
Dewar vessels
YD2002-035
Dewar vessel
YD2005-200
Dewar vessels
YD2030-050 (with protective cover) & YD2030-080
DEWAR VESSELS FOR WORK AND STORAGE

The top of the neck of the 30L storage Dewar has 6 grooves and stamped numbers for holding and identifying canisters.
The 30L storage Dewars come with a protective cover.
The 2L Dewar has 3 grooves and comes with 1 canister and a protective cover with backpack straps.

The 35L Dewar can hold up to 6 canisters. The canisters dimensions can be tailored to suit the application ‐ ask.
The 35L has a static evaporation rate (L/day) of < 0.12L/day.
The 5L dewar has a static holding time of 2‐3 days.


Each Dewar comes with one ladle and one canister (except the 2L Dewar; which only comes with one canister)

Specifications

Cat. No.LN2 capacity (L)Neck ID (mm)Total LN2 evaporationVessel OD (mm)Height (mm)Weight, empty (kg)Weight, full (kg)
YD2002‐035235202243902.23.8
YD2005‐2005200228540049
YD2006‐050650462854805.510
YD2010‐050105076285550715
YD2015‐05015501233456501022
YD2020‐05020501453456501027
YD2030‐05030502404556601539
YD2030‐08030801264556601539
YD2030‐12530125934556701539
YD2030‐20030200464556801539
YD2035‐05035502604556601644
YD2035‐08035801504556601745
YD2035‐125351251034556701745
YD2035‐20035200544556901745
YD2005-200
Dewar vessel, liquid nitrogen storage, 5L, neck ID200mm
AUD801.00
ea
BACKORDER 
YD2010-050
Dewar vessel, liquid nitrogen storage, 10L, neck ID50mm
AUD766.00
ea
BACKORDER 
YD2015-050
Dewar vessel, liquid nitrogen storage, 15L, neck ID50mm
ea
QUOTE
YD2020-050
Dewar vessel, liquid nitrogen storage, 20L, neck ID50mm
ea
QUOTE
YD2030-050
Dewar vessel, liquid nitrogen storage, 30L, neck ID50mm
ea
QUOTE
YD2030-080
Dewar vessel, liquid nitrogen storage, 30L, neck ID80mm
ea
QUOTE
YD2030-125
Dewar vessel, liquid nitrogen storage, 30L, neck ID125mm
ea
QUOTE
YD2030-200
Dewar vessel, liquid nitrogen storage, 30L, neck ID200mm
ea
QUOTE
YD2035-050
Dewar vessel, liquid nitrogen storage, 35L, neck ID50mm
ea
QUOTE
YD2035-080
Dewar vessel, liquid nitrogen storage, 35L, neck ID80mm
ea
QUOTE
YD2035-125
Dewar vessel, liquid nitrogen storage, 35L, neck ID125mm
ea
QUOTE
YD2035-200
Dewar vessel, liquid nitrogen storage, 35L, neck ID200mm
ea
QUOTE
liquid nitrogen dewar vessel for transport and storage
YD3010-050
liquid nitrogen dewar vessels for transport and storage
YD3030-050 & YD3030-080 (with protective cover)
liquid nitrogen dewar vessels for transport and storage
YD3050-050 & YD3100-200

DEWAR VESSELS FOR TRANSPORT AND STORAGE

The 10L and the 30L transport and storage Dewars come with a protective cover.
The top of the neck has 6 grooves and stamped numbers for holding and identifying canisters, which can be bought separately.
The 30L and 50L Dewars are available with the following neck sizes: 50, 80, 125, 200mm.
The 50L and 100L Dewars are on a large base with 5 evenly spaced wheels for easy moving and greatest stability.
The 100L Dewars have 6 positions to accept hanging racks and/or ladles and canisters.

Each Dewar comes with one ladle and one canister

Specifications

Cat. No.YD3010-050YD3030-050YD3030-080YD3050-050YD3100-125
LN2 capacity (L)10303050100
Total LN2 evaporation50 days154 days90 days182 days150 days
Neck ID (mm)50508050125
Vessel OD (mm)285455455455555
Height (mm)5306806808501180
Weight, empty (kg)615.615.92255
Weight, full (kg)14393962135


Also available in 15, 20 and 35L - ask.
The 50L Dewar is also available in 125mm and 200mm opening - ask.

YD3010-050
Dewar vessel, liquid nitrogen transport and storage, 10L, neck ID50mm
AUD919.00
ea
BACKORDER 
YD3030-050
Dewar vessel, liquid nitrogen transport and storage, 30L, neck ID50mm
ea
QUOTE
YD3030-080
Dewar vessel, liquid nitrogen transport and storage, 30L, neck ID80mm
ea
QUOTE
YD3050-050
Dewar vessel, liquid nitrogen transport and storage, 50L, neck ID50mm
ea
QUOTE
YD3100-125
Dewar vessel, liquid nitrogen transport and storage, 100L, neck ID125mm
ea
QUOTE
YD3100-200
Dewar vessel, liquid nitrogen transport and storage, 100L, neck ID200mm
ea
QUOTE
Canisters and Ladles for LN2
Canisters
LN2 Dewar's opening
Dewar's neck 50mm. Showing numbering and grooves for canisters

CANISTERS AND LADLE FOR DEWAR VESSELS

Stainless steel canisters are for sample storage in or just above liquid N2. The canisters have a coarse mesh at the bottom and a long handle for suspending within a Dewar vessel. Stainless steel is a very poor heat conductor at liquid N2 temperatures. Additionally these handles have a section of fibre glass to further reduce heat conduction.
Canister diameter is limited by the Dewar's neck size, and therefore larger canisters are not suited to smaller necks than designated.
Canisters have a holey bottom whereas a ladle has a solid bottom.

Cat. No.YDC010-050
YDL-038-048
YDC030-050YDC030-080YDC050-050YDL-038-072YDC100-125
TypeLadle & CanisterCanisterCanisterCanisterLadleCanister
Dewar neck ID (mm)5050805050125
Canister height (mm)120120120120160120
Canister OD (mm)383863383895
Canister and handle (mm)480560540720720900
YDC010-050
Canister with handle for 10L vessel with neck ID50mm, SS
10% DISCOUNT FOR 3
AUD59.00
ea
ADD TO CART 
YDC030-050
Canister with handle for 30L vessel with neck ID50mm, SS
10% DISCOUNT FOR 3
AUD68.00
ea
ADD TO CART 
YDC030-050-160
Canister with handle for 30L vessel with neck ID50mm, SS, canister H160mm
10% DISCOUNT FOR 1
AUD6457.60
ea
ADD TO CART 
YDC030-080
Canister with handle for 30L vessel with neck ID80mm, SS
10% DISCOUNT FOR 1
AUD6861.20
ea
ADD TO CART 
YDC050-050
Canister with handle for 50L vessel with neck ID50mm, SS
10% DISCOUNT FOR 1
AUD6861.20
ea
ADD TO CART 
YDC100-125
Canister with handle for 100L vessel with neck ID125mm, SS
10% DISCOUNT FOR 3
AUD108.00
ea
BACKORDER 
YDL-038-048
Ladle for liquid nitrogen, SS, OD38 x H120mm, total length 480mm
AUD87.00
ea
BACKORDER 
YDL-038-056
Ladle for liquid nitrogen, SS, OD38 x H160mm, total length 560mm
AUD87.00
ea
BACKORDER 
YDL-038-072
Ladle for liquid nitrogen, SS, OD38 x H160mm, total length 720mm
AUD87.00
ea
BACKORDER 
Order Type / Payment Method / Address / Shopping Cart / Checkout