
- Collections
Invoil C, formerly Apiezon C Oil (previously M003) (EMS)
Apiezon OILS
Consist of esters or specially selected hydrocarbon fractions. They were developed for vapour-diffusion pump fluids:
- High purity, very low pressure, very stable.
- Pressures lower than 10-7 torr obtainable
- No need for cold trap.
- Good pumping speed.
- No corrosive deposits or vapours.
Physical Properties of Apiezon Oil Type C (now Invoil C)
Diffusion Pump Oil | Type C |
Vapour Pressure,torr @20 deg. C | 10-7 |
Boiling Point, deg. C @ 1 torr | 225 |
Flash Point (open cup) deg. F | 510 |
Pour Point(ASTM) deg. F | 5 |
Density, g/mL @ 20 deg. C | 0.875 |
@ 40 deg. C | 0.863 |
Viscosity, kinematic,cS @ 20 deg. C | 283 |
@ 50 deg. C | 90 |
@ 100 deg. C | 10.6 |
Coefficient of Expansion per | |
deg. C over 20-30 deg. C (ASTM) | 0.00069 |
Thermal Conductivity Btu/in | 0.96 |
INVOIL C (formerly APIEZON OIL C)
Obtains the highest vacuum pressure (10-7 torr) of the Apiezon oils without the need of a cold trap. Suitable for most diffusion pump applications, including in electron microscopes and in vacuum coaters. This is an economic and effective substitute for Santovac 5 fluid. It should be noted that the ultimate vacuum is dependent on a suitably high backing vacuum and the out-gasing of TEM film and column components. Consequently the ultimate vacuum attained with Invoil C (Apiezon C) is very close to the theoretically much superior Santovac 5.
This product is not hazardous and does not require an MSDS.
A safety data sheet is available at apiezon.com
Code | Title | Pack Size | Availability | Price | Updated: 21-05-2022 |
---|---|---|---|---|---|
M1-C-00100-X | Invoil C, formerly Apiezon C Oil (previously M003) (EMS) | 100mL | 1 in stock | AU $115.00 | |
M1-C-00500-X | Invoil C, formerly Apiezon C Oil (previously M003) (EMS) | 500mL | 2 weeks | AU $457.00 |