OPTIONS, MODULAR ACCESSORIES AND COMPONENTS
Low frequency platform option
Platforms with this option incorporate a specially extended isolator, which has a natural frequency of 1.5Hz vertically and horizontally. It is available only for active platforms. The only difference to the standard versions is that the platform depth is increased to 100mm with a corresponding increase in working height to 110mm.
Frames bolt directly to the platforms and they are coated with a hard grey epoxy powder coating. They are supplied with four levelling feet, giving 30mm of adjustment to ensure the frames' stability on most uneven floors. Frame height is 710mm, rising to an operating height of 780mm.
Frame shelves are made from 20mm laminated board and are suitable for supporting equipment such as computers
The platform guard is a sturdy rail (with side rail option) that fully surrounds the platform and protects it against accidental knocks, which would otherwise disturb instruments on the platform.
A 300mm wide shelf, which sits on the guard rail over the platform and is quick and easy to remove and replace.
This padded stand will support monitors weighing up to 30kg. It features 360 degree rotation of the arm as well as height adjustment. It mounts to the platform guard.
These castors incorporate a foot, which can be raised and lowered using a thumbwheel, allowing the workstation to be wheeled around and then securely mounted to the floor in a new location.
Stainless working surface
The dull polished stainless steel surface is ideal for stringent environments, such as within the food industry and in medical applications.
We can supply platforms with a ferromagnetic steel working surface featuring either M6 holes on a 25mm grid of 1/4-20UNC holes on 1 inch centres.
Concentric airmount OAM-AM02
This low profile airmount has a working height of only 40mm. Our unique design incorporates an isolation chamber surrounded by a concentric damping chamber. The chambers are connected by a tuned airflow restrictor which gives optimum damping with no overshoot while isolating out floor vibrations.
The OAM-AM02 isolators are designed to work to around 30kg.
OEM Airmount OAM-AM03
This low cost isolator has a very small footprint and is designed for incorporation into instruments. It is used in conjunction with a damping chamber, which has the advantage of being placeable at some distance from the isolator, as required by the user.
High load isolator OAM-AM07
These high load isolators are capable of supporting loads up to 400kg and have a very low natural frequency as low as 1.1Hz. They are ideal as mounts for heavy sensitive instruments such as electron microscopes.
Levelling arm OAM-AM09
The levelling arm introduces and exhausts air into the isolators to maintain a constant working height. Its response time is much faster than that of the isolators and when used with them produces a working surface that not only feels very stiff but actually has an improved isolation performance.
Note that the monitor stand, OAM-F05, requires a platform guard, OAM-F03.