ETC epoxy adhesives

SKU: EMS50380-525   |   Availability ⓘ

ETC epoxy adhesives

SKU: EMS50380-525   |   Availability ⓘ
Style
Pack Size
AU $84.00 Regular price

Taxes and shipping applied at checkout.

/

Electrically/Thermally Conductive (ETC) epoxy adhesives provide solutions to a variety of electrical, electronic, and thermal design problems throughout the laboratories and industries.

Properties:

Product Number 525 556 597A 598FS
Filler Silver Silver Silver Nickel
Mix Ratio by Weight: Resin : Hardener NA 1:1 NA NA
Mixes Specific Gravity, g/cc @ 25°C 1.85 2.8 2.3/2.1 2.87/1.5
Mixes Viscosity, @ 25°C, cps Paste Paste Paste/Paste Paste/480
Pot Life, 100g mass @ 25°C, hrs. N/A 1 N/A N/A
Recommended Cure, hr/°F 2/300 24/RT 2/RT+2/200 2RT+2/200
Alternative Cure, hr/°F 6/250 4/170 or 2/210 -- --
Temperature Resistance 171°C 171°C 649°C 538°C
CTE, in/in/°F x 106 (°C) 52.2°C 25.0°C 17.3°C 11.7°C
Thermal Conductivity, Btu-in/hr-ft2-°F 62.2 65.0 63.1 17.9
Tensile Shear Strength, psi * 2,500 1,500 -- --
Volume Resistivity, ohm-cm 0.01 0.0052 0.0002 0.005
Dielectric Strength, volts/mil - - - -
Chemical Resistance Excellent Excellent Excellent Excellent
Colour Silver Silver Silver Dark Gray

Properties:

Product Number 598FS 568 805 860
Filler Nickel Aluminium
Aluminium Aluminium Nitride
Mix Ratio by Weight: Resin : Hardener NA 1:1 100:12 1:1
Mixes Specific Gravity, g/cc @ 25°C 2.87/1.5 0.85 1.66 1.9
Mixes Viscosity, @ 25°C, cps Paste/480 Paste 85,000 Paste
Pot Life, 100g mass @ 25°C, hrs. N/A 4.0 ≤1.0
4.0
Recommended Cure, hr/°F 2RT+2/200 2/200 2/100+2/200
2/200
Alternative Cure, hr/°F -- 24-48/RT 24-48/RT
24-48/RT
Temperature Resistance 538°C 204°C 300°C 400 (204)
CTE, in/in/°F x 106 (°C) 11.7°C 60.0°C 45.0°C 18.7 (33.3)
Thermal Conductivity, Btu-in/hr-ft2-°F 17.9 9.0 12.5 8.5
Tensile Shear Strength, psi * -- 1,400 1,200 1,375
Volume Resistivity, ohm-cm 0.005 1.0 x 105 1.0 x 1014 1.0 x 1014
Dielectric Strength, volts/mil - 80 50 250
Chemical Resistance Excellent Excellent
Good Excellent
Colour Dark Gray Grey Grey Grey

Store at room temperature 

Application Notes:

Surface Preparation: All surfaces must be free of oil, dirt, corrosives, oxides, paint or other foreign matter.

Mixing: Two-component products should be mixed thoroughly to a uniform consistency. Preheat high viscosity epoxies to approximately 125°F to facilitate pouring and mixing.

Application: In most cases, the adhesive should be applied to both surfaces maintaining a glue line of less than 10 mils (25.4µm). After assembling the parts, pressure should be applied to the assembly to prevent warpage and reduce air entrapment. Refer to curing guidelines in above property chart.

Technical Data

Technical Data  

Technical Data

Product Details Safety
ETC Bond 525 Electrically conductive, silver filled, one-part epoxy paste. Good chemical resistance and mechanical strength to 340°F.  
MSDS
ETC Bond 556
Electrically conductive. Silver filled, 1:1 Epoxy paste. Good corrosion resistance and mechanical strength to 340°F
Part A MSDS 
Part B MSDS
ETC Bond 597A Electrically and thermally conductive. Silver filled. One part system. Inorganic system for bonding applications up to 1200°F.
ETC Bond 598FS Electrically and thermally conductive. Nickel filled. One part system. Low viscosity. For applications up to 1000°F
MSDS

ETC Bond 568

Thermally conductive. Aluminium filled, 1:1 epoxy paste. Excellent mechanical strength to 400°F
Part A MSDS   
Part B MSDS
ETC Bond 805
Thermally conductive. Aluminium filled. Two part epoxy paste. Low shrink rate. Excellent mechanical strength to 570°F
Part A MSDS
Part B MSDS
ETC Bond 860
Thermally conductive. Aluminium nitride filled. 1:1 epoxy paste. Excellent mechanical & thermal properties to 400°F
Part A MSDS
Part B MSDS

 

ETC epoxy adhesives

Images are illustrative only. Please check product details before ordering.

Updated: 24-11-2024
Code Style Pack Size Availability* Price (ex GST)
EMS50380-525 Bond 525 5g 0 in stock (?) AU $84.00
EMS50380-556 Bond 556 5g 0 in stock (?) AU $84.00
EMS50380-597 Bond 597A 5g 0 in stock (?) AU $80.00
EMS50380-598 Bond 598FS 50g 0 in stock (?) AU $87.00
EMS50380-568 Bond 568 2 x 25g 0 in stock (?) AU $86.00
EMS50380-805 Bond 805 2 x 25g 0 in stock (?) AU $84.00
EMS50380-860 Bond 860 2 x 25g 0 in stock (?) AU $84.00

REFUNDS AND RETURNS

Please ask prior to returning any goods.

Defective products should be returned to us for replacement or credit. It is best to contact support with as much detail as possible, including pictures, so we can quickly resolve the issue. ProSciTech Pty Ltd complies with the ACCC guidelines, available here: https://www.accc.gov.au/consumers/consumer-rights-guarantees/repair-replace-refund 

If you decide the item purchased does not suit your requirements, you may contact us to see if a return is possible. Some items may not be refunded, so please ask before purchase if you think a return may be necessary. The greater of $15 or 15% re-stocking charge  will be levied on materials returned due to an error on the part of the customer. We try to keep this charge minimal, however returns do have a cost to us.

SHIPPING INFORMATION

Shipping and Handling charges are $20 for Australian orders; free for orders over $200. 

In-stock items are generally sent same day. Orders are shipped shipped from Townsville, Queensland. Our couriers pick up from 2:30pm, so please place your order in plenty of time for processing and packing if you would like it sent same day. When items are not in stock, your order may be part-shipped. Items on back-order will be sent as soon as they become available.

ProSciTech will choose the courier for your order with consideration for the destination, value of parcel, weight and perishability of contents. It is our concern that our shipments reach you, our customer, rapidly and in good condition. Please contact us if you have any issues with a shipment and we will do our best to resolve it. Please keep in mind however, that our legal responsibility ends when goods are passed to the carrier.

Order Value Shipping and Handling charges
Greater than $200 - (exceptionally heavy or Dangerous Goods excluded). Free
Less than $200 $20
Express shipping $30

Delivery times:

Check your email for tracking details provided at time of shipping for updates of your parcel. We cannot guarantee delivery times, as this is outside of our control. The following are the delivery estimates as given by our couriers. 

Regular shipping
Queensland   1-3 business days 
Sydney   2-5 business days 

Melbourne, Adelaide, Hobart or Canberra 

 3-10 business days 

WA, NT and non-metro areas

 4-10 business days 
Express shipping
Australia wide   1-2 business days

Urgent Orders:

Please request "Express" if you would like us to upgrade your shipment to express delivery. Providing your order fits in a satchel and/or is under 1kg in weight, we will ship your order either DHL, TNT or Express Post. Larger or heavy orders need a quotation for additional freight costs.

Dangerous goods:

See the table on the page for DG shipment costs by road. Please specify when ordering if you require air service (this can be prohibitively expensive). Please request a quotation. We will charge at cost.
 

Shipping to New Zealand Destinations

Orders are now shipped 'receipted delivery'.

Charges:

Order Value Shipping and Handling charges
Greater than $200 - (exceptionally heavy or Dangerous Goods excluded). Free
Less than $200 $26 Minimum Charge

Heavy items (e.g. benchroll or large quantities of microscope slides) may require an additional freight charge - please ask for a quote.

DANGEROUS GOODS shipped to New Zealand: Dangerous goods will be air-freighted and the freight charge billed at cost. Typically, this will be about AUD $600AUD to New Zealand (Up to 2kg).

Delivery times: by air with signature on delivery, depending on courier, delivery can take 3-14 working days. Customs delays are unpredictable and can extend the delivery. Due to COVID19 delivery times have been extended through the couriers and are out of our control.

Shipping to Rest of World Destinations

Contact us for a quote for shipping. 

Delivery times: by air with signature on delivery, depending on courier, delivery can be 7-21 working days. Customs delays are unpredictable and can extend the delivery time. Due to COVID19 delivery times have been extended through the couriers and are out of our control.

DANGEROUS GOODS shipped outside Australia: Not available

GUARANTEE

All products are guaranteed as advertised. Defective products should be returned to us for replacement or credit. Please contact us prior to returning goods. 

We endeavour to provide accurate descriptions, illustrations, prices and stock availability, but errors and omissions are possible. All quotations are E&OE (Errors and Omissions Excepted) 

LIABILITY

All products are intended for laboratory applications only and the user assumes all responsibility involved in use and handling. We accept no liability for loss or damage resulting from the use or abuse of our products. 

At ProSciTech, we make it easy for you to get an accurate quote for the products you're interested in. Our automatic quote generates a formal quote, including shipping, and sends it to your inbox.

If you can see the price and you are within Australia, you can generate a quote at any time.


Creating a quote:

1. Click "Log In" to sign in or create an account

This is just an online profile. It will store your address(s) and online order history. It does not store credit card details. WE DO NOT SPAM.

Click "Log In" to sign in or create an account

2. If you do not have an account, click "create account"

Accounts are just a profile, and are identified by email address, not by name or institution. 

If you do not have an account, click "create account"

3. Fill in your name, email address, choose a password, and click "Create"

Fill in your name, email address, choose a password, and click "create"

4. Go to your account

When you a logged in, your email address will show as your profile

Click on to your account to enter shipping address

5. Enter your shipping details and click "Add address"

You can store more than one shipping address.  

Enter your shipping details and click "Add address"

6. Go to the product page of the item(s) you would like quoted.

Go to the product page of the item(s) you would like quoted.

7. Click on "Add to formal quote"

Click on Add to formal quote

Repeat for any additional products


8. Go to your cart

Go to the cart

9. Check the product details and the address are correct

Check the product details and the address are correct

10. Click on your preferred shipping method

You can collect, choose regular shipping, or ship express for light orders.

Click on which method of shipping you prefer

11. Click on "Generate formal quote"

Click on Generate formal quote

If your quote has generated successfully, it will show the following message : Thank you for your quote request. You will receive your quote via email shortly.

If your quote has generated successfully, it will show the following message : Thank you for your quote request. You will receive your quote via email shortly.

Trouble Shooting

  1. You do not receive the quote
    Solution: If you received a message to say a quote has been sent, check your spam folder. If you have a very strict firewall, please email to ask the quote is sent direct.
  2. No discount applied
    Solution: Check the discount, as most discounts apply to online orders only.
  3. Incorrect freight charge (eg there is freight charged on an order over $200)
    Solution: check you are logged in and you have entered your shipping address.

For Manual Quotes:

In some cases, a manual quote may be necessary. This could be if the product doesn't have a price listed online, if you're located outside of Australia, or if your total order will exceed $1000.

To request a manual quote, simply click the "Request Quote" button and submit a support ticket with your shipping address and phone number. Alternatively, you can email us directly at support@proscitech.com. Our team will review your request and send you a quote as soon as possible, generally 1-2 days.