Sign up today and we'll send you a 10% discount code towards your first purchase. Some restrictions apply.
LABEC Autoclaves are ideal for steam pressure sterilisation, media preparation and waste destruction. Modern styling and materials have been used in the construction to ensure ease of maintenance, operation and user safety. Constructed in accordance with Australian Standard 210 and approved by Department of Labour and Industry of NSW with reciprocal approval by equivalent bodies in all states of Australia. Optional additions available.
Construction
The pressure vessel, lid and components exposed to steam are constructed from 18/8 stainless steel specifically chosen for its corrosion resistance characteristics. The outer case is 304 grade stainless steel. The lid is counter balanced for ease and safety of opening and seals on a silicone rubber recessed gasket.
Controls
Pressure and temperature is controlled by a digital set point, digital temperature indicating microprocessor controller. A pressure gauge registers chamber pressure. An automatic 0-300hr timer is fitted which commences when the desired temperature is reached and at completion of cycle the heaters are switched off.
Heating
Heating by immersion elements in the base of the vessel and only a small amount of water is required, resulting in fast heat up times. An electric low water switch will protect the element and turn off power should the water level be below the required level. The electrical supply required is either 15AMP or 20AMP single or two phase, which may be plugged or hard wired directly to electrical supply. No special plumbing is required but the vents may be plumbed to a suitable drain to avoid steam exhaust in the autoclave location.
Specifications:
|
Model |
EAA13 |
EAA16 |
EAA18 |
EAA20 |
| Capacity |
40L | 60L | 80L | 100L |
| Internal Diameter x Depth |
33 x 46cm |
33 x 60cm |
46 x 46cm |
46 x 60cm |
| External Dimensions (H x W x D) |
95 x 70 x 70cm |
110 x 70 x 70cm |
95 x 80 x 75cm |
110 x 80 x 75cm |
| Temp. Controller |
Digital PID Controller | |||
| Temp. Range |
Ambient +5?C to 135?C | |||
| Temp. Setting Accuracy |
?0.1?C |
|||
| Temp. Fluctuation |
?1.0?C |
|||
| Temp. Sensor |
Type K | |||
| Heating System |
Electric Element |
|||
| Timer |
0-300 hrs/mins/secs |
|||
| Pressure Max. |
215kPa |
|||
| Interior Material |
321 Stainless Steel |
|||
| Exterior Material |
Stainless Steel |
|||
| Baskets (standard) |
1 | |||
| Options |
Steam injection, additional baskets, internal thermocouple, programmable controller, chart recorder, gantry lifting system, castors, rapid heat up time, increased working depth chambers. |
|||
| Safety Features |
Over pressure relief valve, earth leakage breaker (ELB), low water level sensor, two stage interlocking safety door. |
|||
| Power Supply |
15AMPS /Single Phase |
20AMPS /Single Phase |
Three Phase + Neutral | |
| Power |
3600W | 4000W | 6000W | |
| Weight |
80kg | 90kg | 120kg | 130kg |
Images are illustrative only. Please check product details before ordering.
| Code | Size | Pack Size | Availability* | Price (ex GST) | |
|---|---|---|---|---|---|
| EAA13 | 40L | Each | 6 weeks | AU $18,506.00 + Freight | |
| EAA16 | 60L | Each | 6 weeks | AU $18,996.00 + Freight | |
| EAA18 | 80L | Each | 6 weeks | AU $23,996.00 + Freight | |
| EAA20 | 100L | Each | 6 weeks | AU $24,506.00 + Freight |
X weeks – the estimated lead time, based on the average time taken previously to fill orders from this particular supplier. Lead times are from when we receive your order until when we fill your order. For delivery times, please see shipping information below.
In Stock – Plenty of stock on the shelf, ready to ship.
No ETA – our supplier has advised they cannot provide an accurate ETA. Generally there is some issue with supply, and it may be more than 6 months.
Please ask prior to returning any goods.
Defective products should be returned to us for replacement or credit. It is best to contact support with as much detail as possible, including pictures, so we can quickly resolve the issue. ProSciTech Pty Ltd complies with the ACCC guidelines, available here: https://www.accc.gov.au/consumers/consumer-rights-guarantees/repair-replace-refund
If you decide the item purchased does not suit your requirements, you may contact us to see if a return is possible. Some items may not be refunded, so please ask before purchase if you think a return may be necessary. The greater of $15 or 15% re-stocking charge will be levied on materials returned due to an error on the part of the customer. We try to keep this charge minimal, however returns do have a cost to us.
Shipping and Handling charges are $20 for Australian orders; free for orders over $200.
In-stock items are generally sent same day. Orders are shipped shipped from Townsville, Queensland. Our couriers pick up from 2:30pm, so please place your order in plenty of time for processing and packing if you would like it sent same day. When items are not in stock, your order may be part-shipped. Items on back-order will be sent as soon as they become available.
ProSciTech will choose the courier for your order with consideration for the destination, value of parcel, weight and perishability of contents. It is our concern that our shipments reach you, our customer, rapidly and in good condition. Please contact us if you have any issues with a shipment and we will do our best to resolve it. Please keep in mind however, that our legal responsibility ends when goods are passed to the carrier.
| Order Value | Shipping and Handling charges |
|---|---|
| Greater than $200 - (exceptionally heavy or Dangerous Goods excluded). | Free |
| Less than $200 | $20 |
| Express shipping | $30 |
Delivery times:
Check your email for tracking details provided at time of shipping for updates of your parcel. We cannot guarantee delivery times, as this is outside of our control. The following are the delivery estimates as given by our couriers.
| Regular shipping | |
|---|---|
| Queensland | 1-3 business days |
| Sydney | 2-5 business days |
|
Melbourne, Adelaide, Hobart or Canberra |
3-10 business days |
|
WA, NT and non-metro areas |
4-10 business days |
| Express shipping | |
| Australia wide | 1-2 business days |
Please request "Express" if you would like us to upgrade your shipment to express delivery. Providing your order fits in a satchel and/or is under 1kg in weight, we will ship your order either DHL, TNT or Express Post. Larger or heavy orders need a quotation for additional freight costs.
See the table on the page for DG shipment costs by road. Please specify when ordering if you require air service (this can be prohibitively expensive). Please request a quotation. We will charge at cost.
Orders are now shipped 'receipted delivery'.
| Order Value | Shipping and Handling charges |
|---|---|
| Greater than $200 - (exceptionally heavy or Dangerous Goods excluded). | Free |
| Less than $200 | $26 Minimum Charge |
Heavy items (e.g. benchroll or large quantities of microscope slides) may require an additional freight charge - please ask for a quote.
DANGEROUS GOODS shipped to New Zealand: Dangerous goods will be air-freighted and the freight charge billed at cost. Typically, this will be about AUD $600AUD to New Zealand (Up to 2kg).
Delivery times: by air with signature on delivery, depending on courier, delivery can take 3-14 working days. Customs delays are unpredictable and can extend the delivery. Due to COVID19 delivery times have been extended through the couriers and are out of our control.
Contact us for a quote for shipping.
Delivery times: by air with signature on delivery, depending on courier, delivery can be 7-21 working days. Customs delays are unpredictable and can extend the delivery time. Due to COVID19 delivery times have been extended through the couriers and are out of our control.
DANGEROUS GOODS shipped outside Australia: Not available
All products are guaranteed as advertised. Defective products should be returned to us for replacement or credit. Please contact us prior to returning goods.
We endeavour to provide accurate descriptions, illustrations, prices and stock availability, but errors and omissions are possible. All quotations are E&OE (Errors and Omissions Excepted)
All products are intended for laboratory applications only and the user assumes all responsibility involved in use and handling. We accept no liability for loss or damage resulting from the use or abuse of our products.
This is just an online profile. It will store your address(s) and online order history. It does not store credit card details. WE DO NOT SPAM.
Accounts are just a profile, and are identified by email address, not by name or institution.
When you a logged in, your email address will show as your profile
You can store more than one shipping address.
You can collect, choose regular shipping, or ship express for light orders.
In some cases, a manual quote may be necessary. This could be if the product doesn't have a price listed online, if you're located outside of Australia, or if your total order will exceed $1000.
To request a manual quote, simply click the "Request Quote" button and submit a support ticket with your shipping address and phone number. Alternatively, you can email us directly at support@proscitech.com. Our team will review your request and send you a quote as soon as possible, generally 1-2 days.
