K850 critical point dryers and accessories

SKU: QUOEK3102   |   Availability ⓘ

K850 critical point dryers and accessories

SKU: QUOEK3102   |   Availability ⓘ
Type
Pack Size
P.O.R.


The K850 combines versatility and ease of operation. Built-in thermo-electric heating and adiabatic cooling allow precise temperature control. The K850WM is a compact, bench-top instrument with a convenient wafer holder allowing rapid transfer and ensures that pre-drying does not occur.

K850: 

  • Side viewing chamber port : good visibility 
  • Built-in adiabatic cooling and thermoelectric heating : accurate temperature control, no external water supply needed 
  • Fine control needle valve pressure let-down : precise control of decompression avoids potential damage to specimens by uncontrolled pressure release 
  • Built-in magnetic stirrer : enhances solvent exchange 
  • Temperature monitoring and control with thermal cut-out protection 
  • Pressure monitoring with safety cut-out for over pressure 
  • Easy to operate valves : light finger pressure only is needed to open and close 
  • Optional holders for large specimens and coverslips 

The K850 is fitted with thermo-electronic heating and adiabatic cooling with temperature control of 5?C cooling and 35?C during heating. This allows pre-cooling of the chamber to aid filling with liquid CO2 and during the heating cycle ensures that the critical point is accurately obtained. Three valves: fluid inlet, flushing and a gas venting system which uses a fine needle valve to give controlled pressure let down. A built-in magnetic stirrer ensures thorough mixing of specimens with circulating fluids. The standard specimen holder has 12 individual chambers (8mm diameter x 8mm high) and allows easy exchange and transfer. There are optional holders for large specimens and for microscope coverslips. For very small specimens porous pots are available. 

K850WM: 

  • 170mm diameter process chamber: optimised for wafer and MEMS drying 
  • Vertical chamber with top-loading and bottom draining: ensures specimens do not become uncovered during drying 
  • Thermo-electric heating: accurate temperature control 
  • Fine-control needle valve pressure let-down: precise control 
  • Temperature monitoring and control with thermal cut-out protection 
  • Pressure monitoring with safety cut-out for over pressure 

The K850WM has built-in heating and water cooling using the E4860 recirculating heater/chiller. This combination will give temperature control of down to 5?C cooling and 35?C during heating. This ensures the critical point is accurately obtained, avoiding excess pressures or temperatures, or the need to rely on pressure relief valves to control pressure during the heating cycle. The vertical chamber allows top-loading of specimens. A viewing port is fitted in the top plate for specimen observation. The exchange mechanism is simple to use and ensures specimens remain under liquid during loading. 

Specimen handling 

Single 4 inch or 6 inch wafers are held in a PTFE holding tray. The tray including wafer is immersed in chosen transition fluid (e.g. acetone) in order to remove all moisture from the specimen. After dehydration, the wafer and holder are transferred into the pre-cooled specimen chamber using the wafer transfer device. On completion of the critical point drying process, the wafer is removed from the chamber using the transfer device prior to further processing. 

 Specifications:

Model Details
K850
  • Includes: 1 x Specimen holder stainless steel (12 compartments 8mm x 8mm) and 10 x PTFE Porous Specimen Pots (18mm x 14mm Pack 10)
  • Instrument case 450mm W x 350mm D x 175mm H
  • Weight 12kg
  • Specimen chamber 30mm diameter x 40mm H (tested to 3000psi)
  • Temperature gauge 0-120?C
  • Thermal cut-out 40?C
  • Pressure gauge 0-3000psi
  • Pressure relief at 1700psi
  • Rupture disc - At 1900psi
  • Peltier cooling/heating 5?C to 35?C
  • 4 x On/off valves, cool/fill/out/bleed
  • 1 x Needle valve letdown, fine bleed (in series with bleed)
  • NOTE - Flow gauge monitor option fitted externally in series with fine bleed. (0-2.2L/min, CP03266-18)
  • Services - Requires CO2 (local supply) high pressure hose for direct connection. (High pressure hose included with instrument)
  • Electrical 230V, 50Hz (3A Max.) or 115V, 60Hz (6A max.)
  • Warranty - 3 Years all parts
K850WM
  • Includes: PTFE specimen holder (for a 150mm wafer), high pressure CO2 hose, operating manual and test certificate
  • Dimensions - W450 x D350 x H175mm
  • Weight - 12kg
  • Chamber size 170mm internal diameter x 15mm high
  • Test pressure 3000psi
  • Operating temperature 35?C (critical point temperature is 32?C)
  • Operating pressure 1350psi (critical point pressure 1172psi)
  • Pressure safety cut-out 1700psi
  • Electrical 230V 50Hz (3A max) or 115V 60Hz (6A max)
  • Site considerations - Requires space for CO2 cylinder
  • Requirements E4860 Heater/chiller (for cooling chamber), EK3102 CO2 bottle heating system

Quorum Critical Point Dryers product brochure

Images are illustrative only. Please check product details before ordering.

Updated: 24-11-2024
Code Type Pack Size Availability* Price (ex GST)
QUOEK3102 CO2 conditioning system Each 10 weeks P.O.R.
QUOEK4130 Bulk sample holder Each 10 weeks P.O.R.
QUOEK4135 Coverslip holder Each 10 weeks P.O.R.
QUOEK4141 TEM grid holder Each 10 weeks P.O.R.
QUOEK4145 Porous pot holder Each 10 weeks P.O.R.
QUOK850 Critical point dryer Each 10 weeks P.O.R.
QUOK850WM Critical point dryer, large chamber Each 10 weeks P.O.R.

* Availability Explanation

X weeks – the estimated lead time, based on the average time taken previously to fill orders from this particular supplier. Lead times are from when we receive your order until when we fill your order. For delivery times, please see shipping information below.

In Stock – Plenty of stock on the shelf, ready to ship.

No ETA – our supplier has advised they cannot provide an accurate ETA. Generally there is some issue with supply, and it may be more than 6 months.

REFUNDS AND RETURNS

Please ask prior to returning any goods.

Defective products should be returned to us for replacement or credit. It is best to contact support with as much detail as possible, including pictures, so we can quickly resolve the issue. ProSciTech Pty Ltd complies with the ACCC guidelines, available here: https://www.accc.gov.au/consumers/consumer-rights-guarantees/repair-replace-refund 

If you decide the item purchased does not suit your requirements, you may contact us to see if a return is possible. Some items may not be refunded, so please ask before purchase if you think a return may be necessary. The greater of $15 or 15% re-stocking charge  will be levied on materials returned due to an error on the part of the customer. We try to keep this charge minimal, however returns do have a cost to us.

SHIPPING INFORMATION

Shipping and Handling charges are $20 for Australian orders; free for orders over $200. 

In-stock items are generally sent same day. Orders are shipped shipped from Townsville, Queensland. Our couriers pick up from 2:30pm, so please place your order in plenty of time for processing and packing if you would like it sent same day. When items are not in stock, your order may be part-shipped. Items on back-order will be sent as soon as they become available.

ProSciTech will choose the courier for your order with consideration for the destination, value of parcel, weight and perishability of contents. It is our concern that our shipments reach you, our customer, rapidly and in good condition. Please contact us if you have any issues with a shipment and we will do our best to resolve it. Please keep in mind however, that our legal responsibility ends when goods are passed to the carrier.

Order Value Shipping and Handling charges
Greater than $200 - (exceptionally heavy or Dangerous Goods excluded). Free
Less than $200 $20
Express shipping $30

Delivery times:

Check your email for tracking details provided at time of shipping for updates of your parcel. We cannot guarantee delivery times, as this is outside of our control. The following are the delivery estimates as given by our couriers. 

Regular shipping
Queensland   1-3 business days 
Sydney   2-5 business days 

Melbourne, Adelaide, Hobart or Canberra 

 3-10 business days 

WA, NT and non-metro areas

 4-10 business days 
Express shipping
Australia wide   1-2 business days

Urgent Orders:

Please request "Express" if you would like us to upgrade your shipment to express delivery. Providing your order fits in a satchel and/or is under 1kg in weight, we will ship your order either DHL, TNT or Express Post. Larger or heavy orders need a quotation for additional freight costs.

Dangerous goods:

See the table on the page for DG shipment costs by road. Please specify when ordering if you require air service (this can be prohibitively expensive). Please request a quotation. We will charge at cost.
 

Shipping to New Zealand Destinations

Orders are now shipped 'receipted delivery'.

Charges:

Order Value Shipping and Handling charges
Greater than $200 - (exceptionally heavy or Dangerous Goods excluded). Free
Less than $200 $26 Minimum Charge

Heavy items (e.g. benchroll or large quantities of microscope slides) may require an additional freight charge - please ask for a quote.

DANGEROUS GOODS shipped to New Zealand: Dangerous goods will be air-freighted and the freight charge billed at cost. Typically, this will be about AUD $600AUD to New Zealand (Up to 2kg).

Delivery times: by air with signature on delivery, depending on courier, delivery can take 3-14 working days. Customs delays are unpredictable and can extend the delivery. Due to COVID19 delivery times have been extended through the couriers and are out of our control.

Shipping to Rest of World Destinations

Contact us for a quote for shipping. 

Delivery times: by air with signature on delivery, depending on courier, delivery can be 7-21 working days. Customs delays are unpredictable and can extend the delivery time. Due to COVID19 delivery times have been extended through the couriers and are out of our control.

DANGEROUS GOODS shipped outside Australia: Not available

GUARANTEE

All products are guaranteed as advertised. Defective products should be returned to us for replacement or credit. Please contact us prior to returning goods. 

We endeavour to provide accurate descriptions, illustrations, prices and stock availability, but errors and omissions are possible. All quotations are E&OE (Errors and Omissions Excepted) 

LIABILITY

All products are intended for laboratory applications only and the user assumes all responsibility involved in use and handling. We accept no liability for loss or damage resulting from the use or abuse of our products. 

At ProSciTech, we make it easy for you to get an accurate quote for the products you're interested in. Our automatic quote generates a formal quote, including shipping, and sends it to your inbox.

If you can see the price and you are within Australia, you can generate a quote at any time.


Creating a quote:

1. Click "Log In" to sign in or create an account

This is just an online profile. It will store your address(s) and online order history. It does not store credit card details. WE DO NOT SPAM.

Click "Log In" to sign in or create an account

2. If you do not have an account, click "create account"

Accounts are just a profile, and are identified by email address, not by name or institution. 

If you do not have an account, click "create account"

3. Fill in your name, email address, choose a password, and click "Create"

Fill in your name, email address, choose a password, and click "create"

4. Go to your account

When you a logged in, your email address will show as your profile

Click on to your account to enter shipping address

5. Enter your shipping details and click "Add address"

You can store more than one shipping address.  

Enter your shipping details and click "Add address"

6. Go to the product page of the item(s) you would like quoted.

Go to the product page of the item(s) you would like quoted.

7. Click on "Add to formal quote"

Click on Add to formal quote

Repeat for any additional products


8. Go to your cart

Go to the cart

9. Check the product details and the address are correct

Check the product details and the address are correct

10. Click on your preferred shipping method

You can collect, choose regular shipping, or ship express for light orders.

Click on which method of shipping you prefer

11. Click on "Generate formal quote"

Click on Generate formal quote

If your quote has generated successfully, it will show the following message : Thank you for your quote request. You will receive your quote via email shortly.

If your quote has generated successfully, it will show the following message : Thank you for your quote request. You will receive your quote via email shortly.

Trouble Shooting

  1. You do not receive the quote
    Solution: If you received a message to say a quote has been sent, check your spam folder. If you have a very strict firewall, please email to ask the quote is sent direct.
  2. No discount applied
    Solution: Check the discount, as most discounts apply to online orders only.
  3. Incorrect freight charge (eg there is freight charged on an order over $200)
    Solution: check you are logged in and you have entered your shipping address.

For Manual Quotes:

In some cases, a manual quote may be necessary. This could be if the product doesn't have a price listed online, if you're located outside of Australia, or if your total order will exceed $1000.

To request a manual quote, simply click the "Request Quote" button and submit a support ticket with your shipping address and phone number. Alternatively, you can email us directly at support@proscitech.com. Our team will review your request and send you a quote as soon as possible, generally 1-2 days.