Q Plus Series sputter coater spare parts and accessories
Q Plus Series sputter coater spare parts and accessories
The Q Plus Series is the latest version of Quorum's internationally acclaimed, market-leading range of sputter and carbon coaters. They are increasingly used in high-resolution microscopy, where ultra-fine coating is a must.
Sputter coating is the standard method for preparing non-conducting or poorly conducting specimens prior to observation in a scanning electron microscope (SEM). Quorum offer low-cost, rotary-pumped sputter coaters for depositing non-oxidising metals - such as gold (Au) and platinum (Pt) - and turbomolecular-pumped coaters, suitable for both oxidising and non-oxidising metals, such as chromium (Cr).
Quorum offers a range of additional accessories including stages, chamber accessories and spares.
Q150 and Q300 parts and accessories available:
Code | Type | Models |
QUOC5460 |
Film thickness monitor quartz crystal (spare) |
All |
QUO10454 |
Film thickness monitor attachment. Including oscillator, feed-through, quartz crystals and holder* |
Q150V, Q150T, Q150R |
QUO10429 |
Extended glass cylinder assembly, 214mm H (standard chamber is 127mm H). Recommended for increased source-to-specimen distance and for coating large specimens |
Q150T, Q150R |
QUO10596 |
Extended glass cylinder assembly, 214mm H (standard chamber is 127mm H). Recommended for increased source-to-specimen distance and for coating large specimens |
Q300T |
QUO27691 |
Extended glass cylinder assembly, 220mm H (standard chamber is 133mm H). For increased source to sample distance and coating large samples. |
Q150V |
QUOO7803 |
Basic oil mist filter (spare) |
Q150V, Q150T, Q150R |
QUO13530 |
Standard coating shield assembly |
Q150V, Q150T, Q150R |
QUO10068 |
Additional standard glass cylinder assembly |
Q150T, Q150R |
QUO10428 |
Full range vacuum gauge assembly. Capable of measurement over the range of 1,000 mbar to 5 x 10-9 mbar. Typical ultimate vacuum of system is 5 x 10-5mbar. Must be factory fitted |
Q300T |
QUO10779 |
Dual channel film thickness monitor. Fully integrated system with Q300T D touch screen display. Allows automatic termination of the sputtering process at pre-selected thickness values. Displays rate for sputtering processes in nm/m, with a resolution of 0.1nm. Two FTM crystal holders are fixed in the chamber to give optimal position for both targets and to coat one material per crystal. Includes two spare quartz crystals |
Q300T |
QUO11880 |
Extended height coating shield assembly |
Q150T |
QUO23606 |
L gasket, non-seal |
Q150T, Q150R |
QUO27607 |
L gasket, non-seal |
Q150V |
QUO11576 |
Coating shields, can be fitted to protect large surfaces from coating deposition - easily removable for ease of cleaning. |
Q300T |
QUO27508 |
O-ring, 2 required per coater |
Q150V |
QUO27608 |
Additional standard glass cylinder assembly, includes glass chamber, implosion guard and gaskets |
Q150V |
QUO10422 |
Rotating vacuum spigot, allows a more convenient connection of the vacuum hose to the rear of the unit, useful for when bench depth is limited. |
Q150T, Q300T |
QUOG6260 |
Glass cylinder 6" diameter |
Q150T |
QUO10731 |
Rotating vacuum spigot, allows a more convenient connection of the vacuum hose to the rear of the unit, useful for when bench depth is limited. |
Q150R |
QUO13711 |
Platinum coating vacuum hose assembly, recommended for if platinum (Pt) is to be sputtered (R S and R ES versions only) |
Q150R |
QUO11223 |
Lockable emergency stop switch, can be mounted on top of the system in a position easily accessible for the operator. It is provided with a key to release the knob after activation. |
Q300T |
* Please note, when evaporating carbon, the FTM ideally should only be used to provide a general indication of the coating thickness. It is not recommended that the FTM is used for termination of the coating process.
Images are illustrative only. Please check product details before ordering.